With a fully wamed up engine, throttle response is very good. Blipping the throttle reacts very fast, no lean spike and AFR's go in the 12 region and fall back to stoich.
With a cold engine though, blipping the throttle results in an extreme lean condition where the engine nearly stalls.
I'm not sure where to adjust things to resolve this, any hints? More ASE?
I didn't take a log, I'll do so in the morning;
blipping the throttle when cold = full lean
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 404
- Joined: Tue Dec 30, 2008 9:46 am
- Location: Belgium
- Contact:
blipping the throttle when cold = full lean
2016 Westfield SEiW MX5 1.8 - 6sp - Torsen - MSM turbo - MS3 Pro - 2.3kg/hp
Re: blipping the throttle when cold = full lean
have you tried adjusting the 'cold accel multiplier(%)'
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
-
- Master MS/Extra'er
- Posts: 404
- Joined: Tue Dec 30, 2008 9:46 am
- Location: Belgium
- Contact:
Re: blipping the throttle when cold = full lean
currently at 110%, I'll raise it and see what happens.
2016 Westfield SEiW MX5 1.8 - 6sp - Torsen - MSM turbo - MS3 Pro - 2.3kg/hp