Hi All,
Running MS3 V1.5.0 with MS3X currently I have VSS1 connected to Cam In and it works fine. The signal input from the sensor (1989 BMW E30 VSS switch on Diff) is digital 0-12V. I want add VSS2 which will be a VR ABS WSS. My plan is to relocate VSS1 so as to make the conditioning circuit for Cam In available for the VR sensor. Where can I safely route the 0-12V digital signal? The tooth count on VSS1 is 9, tire diameter 23, I calculate the frequency to be under 300Hz
Thanks
Dave W
VSS1 & VSS2 wiring
Moderators: jsmcortina, muythaibxr
Re: VSS1 & VSS2 wiring
do you have the ms3x card as the switch inputs table, launch ect will work great for the e30 diff sensor
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
Re: VSS1 & VSS2 wiring
So... launch In, Nitrous In etc would work well?
Thanks
Dave W
Thanks
Dave W
Re: VSS1 & VSS2 wiring
yeah im using launch in on my e30
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
Re: VSS1 & VSS2 wiring
Tank You Grom_E30