Sequential shift cut

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
Shady16
Helpful MS/Extra'er
Posts: 72
Joined: Thu Jul 31, 2014 12:47 pm

Sequential shift cut

Post by Shady16 »

Is there a need for a flyback diode across the shift solenoid? I'm getting a loss sync (reason 2) on the shift and it's resetting the nitrous ramp killing et and mph. It only does it on the shift points. It has done it on the 2-3 shift and the 3-4 shift so far. Thanks
Post Reply