MS3-Pro, Firmware 1.51 beta 4
I am setting up a new motor that uses VVT on all four cams. After configuring the VVT Settings and then looking at the Feature list, the settings for Input and Output for VVT4 and the input for VVT1 are not show highlighted. See attached pics. Msq added for reference.
VVT settings not highlighted in feature list
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 687
- Joined: Sun Jun 23, 2013 3:52 pm
VVT settings not highlighted in feature list
MS3-Pro 1st Gen | Honda K24 Supercharged
MS3/MS3X | SB Ford 347 stroker
MS3/MS3X | SB Ford 347 stroker