Electric shift solenoid setup
Moderators: jsmcortina, muythaibxr
Electric shift solenoid setup
I want to install an electric shift solenoid and have it activate based after the launch button has been released and at a certain rpm. How can I do this?
2000 Mustang GT 4.6 4V, MS3 Fully sequential,Twin 6466's,Glide, full fuel system 1100 WHP
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
Re: Electric shift solenoid setup
Anyone? I could also use a set speed to activate the shift perameter. I was just trying to figure out how to reset the solenoid once I slowed down again and went back into first gear
2000 Mustang GT 4.6 4V, MS3 Fully sequential,Twin 6466's,Glide, full fuel system 1100 WHP
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
8.78@160
Stock 2V Longblock- SAE 472Hp/469Tq on E85
11.27@121
-
Matt Cramer
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Electric shift solenoid setup
It can be turned on when launch timer and VSS are both greater than a particular parameter. This will turn it back off once your speed drops.
Matt Cramer -1966 Dodge Dart slant six running on MS3X