hello
wanting to use a cheap Toshiba Satellite 2 in 1 as a data collection and auxilary gauge bank in a drag only car running a MS3 Pro.
the system seems to work ok in the garage, however at the track it looses the connection between the MS3 and the lap top more often than not.
I am using the cable that is part of the MS3 harness and has a serial port on its end. As the Toshiba does not have a serial port, I have a CableMax serial port to USB adapter that plugs into the Toshiba.
The Toshiba is securely mounted on a car laptop pedestal and I have the CableMax adapter firmly held in place with velcro pads.
any ideas on how to make the connection more stable,
thanks
loosing connection to lap top
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 75
- Joined: Fri Dec 25, 2015 8:43 am
Re: loosing connection to lap top
Mine did this as well. Not much you can really do. I moved to sd logging while on the track trigged with a button
-
- Helpful MS/Extra'er
- Posts: 75
- Joined: Fri Dec 25, 2015 8:43 am
Re: loosing connection to lap top
trigged with a button
Can you tell me more on how you are data logging? And how that is set up to activate with a button?
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: loosing connection to lap top
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: loosing connection to lap top
MegaSlant6 wrote:trigged with a button
Can you tell me more on how you are data logging? And how that is set up to activate with a button?
You have to run a input to a momentary button. Im my case i used a didgital switched in and i ran it to my defrost button in my mustang. I then used a spare injector output and wired it to a small light and set it up to come on when datalogging is active.