Dear reader,
Recently, I have replaced ,after 2 years of problem-free use, my K Data ecu (after breaking down) for an MS3 pro that became a left over of a friend failed project.
During boot of the MS, mounted on a Daihatsu JB / JL engine with a VAG coil block , it happens that above approx a unloaded 3000rpm the ignitions fails. Both the rpm sync ( stays green) and rev counter indicating okay.
There i checked with strobe and in the selftune mode tabel the indicator moves shortly to the low rev *left.
Thanks in advance for your support.
Erik
MS3 PRO
Moderators: jsmcortina, muythaibxr