Two basic things I'd need confirmation on.
These are my FFSensor settings. Everything at Tableswitch is deactivated. I don't use (and don't want to use) any table switching for FF as it seems overkill for my case.
Do I assume correctly that if my sensor were to analyse the fuel as 100% ethanol, it would multiply my ReqFuel with 1.63 for the PW calculation and add 3.5° timing? I unfortunately didn't log E85corr so far.
Flex fuel basics
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 374
- Joined: Thu May 26, 2016 1:25 pm
- Location: Germany
Flex fuel basics
My project: Link
-
- Master MS/Extra'er
- Posts: 400
- Joined: Sun Aug 31, 2008 10:20 am
- Location: Utah, USA
Re: Flex fuel basics
I think so
Re: Flex fuel basics
I am also interested in the answer, thank you.
Success story : Mazda rotary engine 13b peripheral ported, microsquirt V2, full alpha-n.
In the works : Volvo 240 4cyl 2.3, Holset HY35 and MS3x
In the works : Volvo 240 4cyl 2.3, Holset HY35 and MS3x
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Flex fuel basics
Yes, that's how it works.
Matt Cramer -1966 Dodge Dart slant six running on MS3X