I have upgraded to 1.5.1...and am trying to fine tune engine states. I have noticed at 37.313 in the log Engine Idling and Engine accelerating slowly are set at the same time.
May I ask why..especially as rpmdot is above the slowly accelerating...so shouldn't the idle bit be reset
Thanks
Multiple Concurrent Engine states
Moderators: jsmcortina, muythaibxr
Multiple Concurrent Engine states
- Attachments
-
- 2017-10-13_14.08.52.msq
- MSQ
- (285.02 KiB) Downloaded 23 times
-
- s.2017-10-13_13_modified.msl
- LOG
- (255.49 KiB) Downloaded 24 times
Re: Multiple Concurrent Engine states
Hi again..
Could I ask..could someone please look into this..it's causing a few instability issues..and I am kind of stuck where to turn.
at 205.375 secs in this log, again Engine Idling and Engine accelerating slowly are set at the same time. RPMdot is clearly higher than 250..so the engine is accelerating slowly..yet Engine idle is still set.
Why are they both set at the same time??
Thanks.
Could I ask..could someone please look into this..it's causing a few instability issues..and I am kind of stuck where to turn.
at 205.375 secs in this log, again Engine Idling and Engine accelerating slowly are set at the same time. RPMdot is clearly higher than 250..so the engine is accelerating slowly..yet Engine idle is still set.
Why are they both set at the same time??
Thanks.
- Attachments
-
- 2017-10-24_15_modified.msl
- Log
- (79.16 KiB) Downloaded 23 times
-
- 2017-10-24_08.12.55.msq
- msq
- (285.02 KiB) Downloaded 17 times