I use ve1 table as MAF correction table.
Is the displayed and logged MAF with or without correction table applied ?
MAF correction table
Moderators: jsmcortina, muythaibxr
Re: MAF correction table
1. So do I.W126 wrote:1. I use ve1 table as MAF correction table.
2. Is the displayed and logged MAF with or without correction table applied ?
2. I would say "without". The MAF value is an input (g/sec) & cannot be changed.
1988 Mustang GT, 59k miles, Orig Owner
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47
Re: MAF correction table
I assume without too.
But I want to know for sure.
But I want to know for sure.