Page 1 of 1
Traction Control Reaction Not Doing What I Think It Would
Posted: Mon Nov 06, 2017 4:51 pm
by goodysgotacuda
I am getting into setting up my traction control and I can't quite get a handle on the reactions. MS3 Gold Box
As you can see my (Slip x Time) pegs out at 110, my Spark: Traction Retard pegs at 13.0°
- Screen Shot 2017-11-06 at 5.44.59 PM.png (35.88 KiB) Viewed 915 times
Where I am misaligned is how the (Slip x Time) is correlating to my reaction plot. As you can see, 13.0° of retard would be about 12-13 (Slip x Time) according to my plot.
- Screen Shot 2017-11-06 at 5.48.21 PM.png (29.68 KiB) Viewed 915 times
Where is it getting the 13.0° of retard from at 100 (Slip x Time)? I would expect it to react "off the charts" and respond at 25° of retard....what am I missing?
Re: Traction Control Reaction Not Meeting My Expectations
Posted: Mon Nov 06, 2017 4:52 pm
by goodysgotacuda
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Wed Nov 08, 2017 6:13 pm
by goodysgotacuda
bump!
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Fri Nov 10, 2017 7:01 pm
by goodysgotacuda
Anyone with TC reaction experience? Could this be a software glitch??
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Sun Nov 12, 2017 4:40 pm
by Suprazz
It look like a bug.
All your settings seems fine and your log show a TC slip * time of over 100.
I dont get why it wont go over 13 of spark traction retard...
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Thu Mar 29, 2018 7:38 pm
by thatredgt
Was this ever resolved? Having a similiar issue
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Wed May 16, 2018 4:54 pm
by Boosted393
I have same problem.
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Sat May 19, 2018 2:45 am
by goodysgotacuda
thatredgt wrote:Was this ever resolved? Having a similiar issue
I have not found a resolution. For the time being, I've given up on messing with the traction control.
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Sat May 19, 2018 3:13 am
by jsmcortina
It is a display issue (numbers scaled wrong in error.) The feature works and there are videos of "Street Outlaws" cars using it successfully.
James
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Sat May 26, 2018 6:10 am
by martin2day
Hello,
i have the same issue... but i find the solution...
In my opinion there is somewhere a wrong calculation.
I have setup my TC like this:
- Bildschirmfoto 2018-05-26 um 15.03.15.png (61.52 KiB) Viewed 508 times
But if i look to my log i see Slip x time values divided by 10 be the correct Ignition retard values.
I see SPK:Traction retard from about 16.4° by 888 TC Slip*time... i have setup it as about 90...
- Bildschirmfoto 2018-05-26 um 15.03.05.png (137.19 KiB) Viewed 508 times
So i change my "slip x time" values divided by 10 and see if this work for my.
You can test it too... or look at the code
Martin
Re: Traction Control Reaction Not Doing What I Think It Woul
Posted: Sun May 27, 2018 5:31 am
by martin2day
Hello,
it is like i say... the values in the MSQ Setup must by devided by 10.
This is my new setup
- Bildschirmfoto 2018-05-27 um 14.25.40.png (69.06 KiB) Viewed 493 times
And this is how the log looks like
- Bildschirmfoto 2018-05-27 um 14.25.33.png (121.22 KiB) Viewed 493 times
As you can see i have setup 20 degree at 10 slip x time... but in the log it is 20 degree at 100 slip x time.
Martin