Hello,
[Time-Based accel] & [Accel-Pump accel], I tried both settings.
[Time-Based accel] could not be worked.
[Accel-Pump accel] could be worked.
Why can not I use [Time-Based accel] ?
Accel enrich settings:Time-Based accel could not work
Moderators: jsmcortina, muythaibxr
Accel enrich settings:Time-Based accel could not work
- Attachments
-
- 2017-11-11_16_Pump-accel.msl
- Accel-pump accel-log
- (1.02 MiB) Downloaded 28 times
-
- 2017-11-11_16_Time-accel.msl
- Time-accel accel-log
- (1.25 MiB) Downloaded 32 times
-
- 2017-11-11_16.20.24.msq
- (285.31 KiB) Downloaded 31 times
MAZDA MX-5 Roadster Turbo with DIY FRP inlet piping & DIY V-mount Inter cooler
MAZDA MX-5 Roadster NA8C 2-liter + VVT & Quadruplicate throttle
Daihatsu Mira LE-L250V 3Cyl. 'Petit' Miller cycle + 'Petit' Lean burn + Turbo + VVT 660cc 690Kg
Suzuki Kei GF-HN21S K6A Turbo 3Cyl. 660cc 740Kg
MAZDA MX-5 Roadster NA8C 2-liter + VVT & Quadruplicate throttle
Daihatsu Mira LE-L250V 3Cyl. 'Petit' Miller cycle + 'Petit' Lean burn + Turbo + VVT 660cc 690Kg
Suzuki Kei GF-HN21S K6A Turbo 3Cyl. 660cc 740Kg
-
- Experienced MS/Extra'er
- Posts: 264
- Joined: Sun Dec 23, 2012 2:20 pm
- Location: Nordmaling, Sweden
Re: Accel enrich settings:Time-Based accel could not work
I use time-based accel with 100% TPSdot blend with no problems. Could it be because you are mixing 50% MAPdot and TPSdot?
Martin, Sweden
Mopar 512 cui, 8.4 liters, high compression, fuel E85, full sequential control by MS3X, burning rubber just blipping the throttle...
Mopar 512 cui, 8.4 liters, high compression, fuel E85, full sequential control by MS3X, burning rubber just blipping the throttle...
Re: Accel enrich settings:Time-Based accel could not work
Thank you for the advice.
I think that it will make sure that the function of [Time-Based accel] works under [100% TPSdot blend] condition.
But [Time-Based accel] menu screen has [MAPdot & TPSdot] blend function.
[Accel-Pump accel] could be worked under [MAPdot 5% & TPSdot 95%] blend condition..
Is not it strange that [Time-Based accel] will not work if it be blended ?
I think that it will make sure that the function of [Time-Based accel] works under [100% TPSdot blend] condition.
But [Time-Based accel] menu screen has [MAPdot & TPSdot] blend function.
[Accel-Pump accel] could be worked under [MAPdot 5% & TPSdot 95%] blend condition..
Is not it strange that [Time-Based accel] will not work if it be blended ?
MAZDA MX-5 Roadster Turbo with DIY FRP inlet piping & DIY V-mount Inter cooler
MAZDA MX-5 Roadster NA8C 2-liter + VVT & Quadruplicate throttle
Daihatsu Mira LE-L250V 3Cyl. 'Petit' Miller cycle + 'Petit' Lean burn + Turbo + VVT 660cc 690Kg
Suzuki Kei GF-HN21S K6A Turbo 3Cyl. 660cc 740Kg
MAZDA MX-5 Roadster NA8C 2-liter + VVT & Quadruplicate throttle
Daihatsu Mira LE-L250V 3Cyl. 'Petit' Miller cycle + 'Petit' Lean burn + Turbo + VVT 660cc 690Kg
Suzuki Kei GF-HN21S K6A Turbo 3Cyl. 660cc 740Kg
Re: Accel enrich settings:Time-Based accel could not work
The strange thing is they are both time based. They should really get rid of the time based accel as it is buggy and doesn't work well. The ACCEl-Pump enrichment works so keep that one.
-
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact: