Hi there.
I am running on my 2jz swapped e30 a MS1 2.2
Due vibrations the MS1 has some issues and I am thinking to go MS3.
I want to keep all my old wiring, is it possible only to change the ecu and to adjust the MS3 from TS or must I do more than that
Greetings George
Go from MS1 2.2 to MS3
Moderators: jsmcortina, muythaibxr
-
turbostarlet
- MS/Extra Newbie
- Posts: 14
- Joined: Fri Apr 06, 2007 8:15 pm
- Location: Dutch Caribbean
Re: Go from MS1 2.2 to MS3
That should be possible.
I've done MS1 V3.0 to MS3 upgrade without any problems.
Maybe you can upload your current MSQ so we can have a look at it.
That way we can give you some pointers if needed.
I've done MS1 V3.0 to MS3 upgrade without any problems.
Maybe you can upload your current MSQ so we can have a look at it.
That way we can give you some pointers if needed.
Toyota Starlet Homemade Turbo.
2E 1.3 liter CT9 1/4 mile:14.60
2E 1.3 liter T25 1/4 mile:13.07
If everything fails, read the manual.
Toyota Starlet V2.0
4A-GTE 1.6 liter CT-26 1/4 mile 12.16
7A-GTE 1.8 liter MSIII+MS3X 1/4 mile 11.90
2E 1.3 liter CT9 1/4 mile:14.60
2E 1.3 liter T25 1/4 mile:13.07
If everything fails, read the manual.
Toyota Starlet V2.0
4A-GTE 1.6 liter CT-26 1/4 mile 12.16
7A-GTE 1.8 liter MSIII+MS3X 1/4 mile 11.90
-
Matt Cramer
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Go from MS1 2.2 to MS3
Please post a pinout of how exactly you have the MS1 wired.
Matt Cramer -1966 Dodge Dart slant six running on MS3X