4cyl sequential with staged injection

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
Shady16
Helpful MS/Extra'er
Posts: 72
Joined: Thu Jul 31, 2014 12:47 pm

4cyl sequential with staged injection

Post by Shady16 »

I'm wanting to know how I set my secondary injectors so they correspond with the correct cylinders running sequential and staged injection. Thanks
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: 4cyl sequential with staged injection

Post by Matt Cramer »

What's the firing order?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Shady16
Helpful MS/Extra'er
Posts: 72
Joined: Thu Jul 31, 2014 12:47 pm

Re: 4cyl sequential with staged injection

Post by Shady16 »

1-2-4-3
benckj
Master MS/Extra'er
Posts: 464
Joined: Mon Dec 19, 2011 3:21 pm

Re: 4cyl sequential with staged injection

Post by benckj »

Although question is about ignition I sort of wonder if I set my sequential VE tables correctly. Certainly it would not be by ignition sequence?

Does Ve table 1= cyl 1
Ve2= cyl 2
Ve3= cyl 3
Ve4= cyl 4
Toyota MR2 98 3sgte
MSPNP2 with 3.57 mainboard
Innovate WB O2 & soon to be external GM 3 bar MAP
FTDI USB interface on SD Android 5.1 head unit
TD05SL2-18g with external WG
HKS EBC running 17psi boost.
A2W IC with WI 50/50 meth/water
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: 4cyl sequential with staged injection

Post by jsmcortina »

benckj wrote:Although question is about ignition I sort of wonder if I set my sequential VE tables correctly. Certainly it would not be by ignition sequence?

Does Ve table 1= cyl 1
Ve2= cyl 2
Ve3= cyl 3
Ve4= cyl 4
Not on MS3 no. Use the per-cylinder trim tables.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply