Page 1 of 1
Flex fuel gauge died
Posted: Mon Dec 11, 2017 7:01 pm
by fast930
MS3X running firmware1.5.1 I️ have 12v ,ground , and sensor all correct and going into ecu, even swapped sensor with known good one and still nothing. Was working flawless. Any help on where to look would be appreciated. I️ am using flex in
Re: Flex fuel gauge died
Posted: Wed Dec 20, 2017 9:13 am
by Matt Cramer
Are you able to get an oscilloscope, or a multimeter with a frequency option, on the flex fuel sensor output?
Re: Flex fuel gauge died
Posted: Tue Jan 02, 2018 1:48 pm
by fast930
matt thanks for getting back. it turns out the KNOWN good sensor was in fact bad. picked up a new continental unit and all is well. thanks again