keeping iac valve open during decel

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
Yves
Super MS/Extra'er
Posts: 1505
Joined: Tue Jun 17, 2014 1:23 pm
Location: Belgium

keeping iac valve open during decel

Post by Yves »

Is it possible to keep the iac open a certain amount during deceleration ? I see only a couple of options, like the iac minimum steps and the delay setting but that's not really doing what I want it to do. In my case I would like to have the idle valve say 40 counts open during untill the throttle is reopened or untill it goes below a certain rpm threshold.

Thanks
Exidous
Helpful MS/Extra'er
Posts: 47
Joined: Sun Aug 27, 2017 10:04 am

Re: keeping iac valve open during decel

Post by Exidous »

I know this is old but I'm interested in this as well.

I'd like to use it to slow rpm drop during over run
Ted75zcar
Experienced MS/Extra'er
Posts: 180
Joined: Fri Dec 23, 2016 7:21 pm

Re: keeping iac valve open during decel

Post by Ted75zcar »

Have you tried a "0" in the close delay field?

Couple this with the initial value table.
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: keeping iac valve open during decel

Post by Matt Cramer »

Is the dashpot adder what you're looking for, or are you trying to do something else with the valve? This function will add a fixed amount of opening when you lift off the throttle.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply