I just bought a meth injection kit. I was going to place the nozzle right before the throttle body. Is that the best location for it when using a megasquirt. Or should it be in front of the AIT sensor. If so I have an open element sensor would I have to change it to a closed element sensor?
Sent from my iPhone using Tapatalk Pro
Meth injection nozzle location
Moderators: jsmcortina, muythaibxr
Re: Meth injection nozzle location
Generally injection nozzle should be placed close to IC outlet so the air charge has plenty of time to mix and cool before entering plenum. Open element for fast responding IAT is best.
Jim
Jim
Toyota MR2 98 3sgte
MSPNP2 with 3.57 mainboard
Innovate WB O2 & soon to be external GM 3 bar MAP
FTDI USB interface on SD Android 5.1 head unit
TD05SL2-18g with external WG
HKS EBC running 17psi boost.
A2W IC with WI 50/50 meth/water
MSPNP2 with 3.57 mainboard
Innovate WB O2 & soon to be external GM 3 bar MAP
FTDI USB interface on SD Android 5.1 head unit
TD05SL2-18g with external WG
HKS EBC running 17psi boost.
A2W IC with WI 50/50 meth/water