I want to run fuelload up to 300kpa absolute (2bar above atmospheric pressure).
I am using the stage option, firmware version MS3 release 1.5.0.
I don`t know why he keeps saying that the maximum fuel load is 250%. I need up to 300%, considering that is the same value as my map pressure 300kpa.
What shall I do?
Maximum Fuelload
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Maximum Fuelload
Make sure you have set the maximum boost level under Basic Set-up -> Gauge and Settings Limits.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: Maximum Fuelload
I checked the Gauge and Settings Limits and is OK.
The message still the same, maximum 250%.
The message still the same, maximum 250%.
-
- Site Admin
- Posts: 39585
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Maximum Fuelload
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Maximum Fuelload
Here is the msq file.
- Attachments
-
- GolPrataMS3XSEQ_2018-01-11_21.05.22.msq
- (274.89 KiB) Downloaded 28 times
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Maximum Fuelload
That's a bit unexpected - I can enter up to 500 kPa fuel load if I open that tune, and the VE and ignition tables both top out at 350 kPa when opened.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: Maximum Fuelload
If you can do it, that will be great....