Bill,
I will check #1 tooth reference again. It is quite difficult with the AEM EPM since the sensor and wheel are all sealed in a package. I did it with a voltmeter on the cam sensor portion before. Thanks for all your help!
John
Corvair hard start
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 15
- Joined: Sat Jan 13, 2018 12:06 pm
-
- Super MS/Extra'er
- Posts: 6828
- Joined: Sun May 15, 2011 11:41 am
- Location: Walnut Creek, Calif. USA
Re: Corvair hard start
Some of my fondest memories are of driving '63/64 Corvairs; I'll try to help as much as I can!
-
- MS/Extra Newbie
- Posts: 15
- Joined: Sat Jan 13, 2018 12:06 pm
Re: Corvair hard start
Bill,
I just started a new post on data logging crank and cam signals. I love my corvairs too. This is my first one with a Megasquirt. Thanks to you it now kinda runs!
I'm having bad luck with AEM EPM's. I'm on the second one and it appears to be bad also.
John
I just started a new post on data logging crank and cam signals. I love my corvairs too. This is my first one with a Megasquirt. Thanks to you it now kinda runs!
I'm having bad luck with AEM EPM's. I'm on the second one and it appears to be bad also.
John