Hi, I'm helping a guy figuring out how he can use a loadcell to activate 3-step limter to allow for gearshift with a sequential transmison in a car.
http://www.kasensors.com/sites/default/ ... SS.503.pdf This is the loadcell.
I don't have a MS3 at hand to test the settings. Do you think this could work?
ADC13 just as an example. And of course Loop1 as input in 3-step limiter.
And the threshold and hysteresis would have to be adjusted for the desired load
I have not tried to use a loop before, but in my head this should work.
Espen
Loop1 as input for 3step?
Moderators: jsmcortina, muythaibxr
Loop1 as input for 3step?
-84 Ford Sierra 2,0ohc GL, soon to be MS'd, NA tuned with rallyecam and TBI.
-98 Mustang Cobra, track car.
-98 Mustang Cobra, track car.
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Loop1 as input for 3step?
Yep, that's what loops work for. They allow creating a virtual on/off input based on more complex conditions.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: Loop1 as input for 3step?
Thank you Matt
-84 Ford Sierra 2,0ohc GL, soon to be MS'd, NA tuned with rallyecam and TBI.
-98 Mustang Cobra, track car.
-98 Mustang Cobra, track car.