Loop1 as input for 3step?

General support questions and announcements for MS3. See also MS3 manuals.

Moderators: jsmcortina, muythaibxr

Post Reply
EspeNS
Experienced MS/Extra'er
Posts: 158
Joined: Sun Dec 13, 2009 11:10 am
Location: Norway

Loop1 as input for 3step?

Post by EspeNS »

Hi, I'm helping a guy figuring out how he can use a loadcell to activate 3-step limter to allow for gearshift with a sequential transmison in a car.
http://www.kasensors.com/sites/default/ ... SS.503.pdf This is the loadcell.
I don't have a MS3 at hand to test the settings. Do you think this could work?
Loadcellloop.png
Loadcellloop.png (244.75 KiB) Viewed 190 times
ADC13 just as an example. And of course Loop1 as input in 3-step limiter.
And the threshold and hysteresis would have to be adjusted for the desired load
I have not tried to use a loop before, but in my head this should work.

Espen
-84 Ford Sierra 2,0ohc GL, soon to be MS'd, NA tuned with rallyecam and TBI.
-98 Mustang Cobra, track car.
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: Loop1 as input for 3step?

Post by Matt Cramer »

Yep, that's what loops work for. They allow creating a virtual on/off input based on more complex conditions.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
EspeNS
Experienced MS/Extra'er
Posts: 158
Joined: Sun Dec 13, 2009 11:10 am
Location: Norway

Re: Loop1 as input for 3step?

Post by EspeNS »

Thank you Matt :D
-84 Ford Sierra 2,0ohc GL, soon to be MS'd, NA tuned with rallyecam and TBI.
-98 Mustang Cobra, track car.
Post Reply