Hi!
I've been off the forums for a while, after selling my project car, so I've not kept up with the progress or status of the Tri-Tach or triple trigger for audi flywheel system.
Is it possible to get this working, or would you recommend me not to try?
The ECU is a MS3X 3.57, and will be updated to the newest firmware.
Engine is a Audi 4.2 V8 32v (engine code ABH)
Audi Tri Tach / Triple trigger, whats the status now?
Moderators: jsmcortina, muythaibxr
Audi Tri Tach / Triple trigger, whats the status now?
-MS3X, (V3 PCB) 1.2 RC 1 firmware. Controlling a light modified Audi 1.8TQ AEB 20v engine with Holset HE221W turbo, 299.4 HP and 400Nm at the hubs in Dynapack.
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: Audi Tri Tach / Triple trigger, whats the status now?
Any update on this? I have a customer that would like to use this mode on his Alfa with a 130T flywheel, flywheel ref sensor and a modded one tooth distributor for a cam sensor. Any way there could be a option that uses one of the Pro VR inputs for the cam sensor?
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Audi Tri Tach / Triple trigger, whats the status now?
The code appeared to work on the bench during development, but on-engine testing seemed unreliable. Remote debug and development isn't easy.
If anyone _does_ have it running successfully please do post here because I've only heard to the contrary.
James
If anyone _does_ have it running successfully please do post here because I've only heard to the contrary.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: Audi Tri Tach / Triple trigger, whats the status now?
James, thanks. I have a motivated customer willing to give proper feedback.
-
- MS/Extra Newbie
- Posts: 21
- Joined: Sun May 24, 2015 10:06 pm
- Location: Houston, TX
Re: Audi Tri Tach / Triple trigger, whats the status now?
Hi James,jsmcortina wrote:The code appeared to work on the bench during development, but on-engine testing seemed unreliable. Remote debug and development isn't easy.
If anyone _does_ have it running successfully please do post here because I've only heard to the contrary.
James
I'm in a similar situation as OP. Is there any improvement with signal reliability (whether empirically shown or not) with the MS3Pro gen1 versus the MS3X? It seems like the board is a more modern design and etc.
1983 Porsche 944 - Microsquirt V3, limited by atmospheric pressure.
1986 Porsche 951 - MS3Pro and a turbo as big as my head
1986 Porsche 951 - MS3Pro and a turbo as big as my head
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Audi Tri Tach / Triple trigger, whats the status now?
I've not heard anything new since I posted last month.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".