Hello,
Having some trouble with my daily driver after upgrading from MS2 to MS3. I've attached my datalog, at 2847 rpm it suddenly decides to die out without timing error.
AFR value is locked at 10.1 because warmup cycle on the Innovative is initiated, after that the afr reads 12-13.
Does anybody have any tips?
BMW M52 fires up, but dies after a few seconds :(
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 17
- Joined: Thu Sep 10, 2015 2:14 pm
- Location: West\South Norway
BMW M52 fires up, but dies after a few seconds :(
- Attachments
-
- M52Bxx.msq
- MSQ
- (284.71 KiB) Downloaded 31 times
-
- 2018-02-11_13.06.33.msl
- MSL
- (144.49 KiB) Downloaded 28 times
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: BMW M52 fires up, but dies after a few seconds :(
Post up and compare a log of a startup from MS2. How do the pulsewidths compare?
You injector deadtime settings look odd. You have the basic deadtime (100%) at 9.2V which is rather unusual.
So the deadtime being used at your running voltage of 11V is about 0.4ms.
Do you have an alternator? It doesn't seem to be working.
James
You injector deadtime settings look odd. You have the basic deadtime (100%) at 9.2V which is rather unusual.
So the deadtime being used at your running voltage of 11V is about 0.4ms.
Do you have an alternator? It doesn't seem to be working.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".