A friend asked me to help wire in a MS3Pro Evo to his 1993 Mustang. I have the 60 pin DIY board and already got a ECU connector off a spare EEC-IV I had. I've done a little searching but not finding any diagrams/pinouts for The MS3Pro Evo to 60 pin. Does anyone have something already drawn up? I've started to compare Ms3x pinouts and they have different connector pinout #s.
So far I have the Inj's, TPS, IAC, ISC. ECT. IAT, and Fuel pump mapped out. But before spending a lot of time on the rest, I was just trying to see if anyone had anything. I plan on using the TFI and no MAF.
I'm probably overlooking what the links/posts that have already covered this, sorry if that's the case.
MS3Pro Evo - 60 Pin DIY to 93 EEC-IV diagram?
Moderators: jsmcortina, muythaibxr
MS3Pro Evo - 60 Pin DIY to 93 EEC-IV diagram?
Last edited by Gt-331 on Sat Mar 17, 2018 7:36 pm, edited 1 time in total.
-
5.0Thunder
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sat Mar 07, 2015 4:46 pm
Re: MS3Pro Evo - 60 Pin DIY to 93 EEC-IV diagram?
Lol bump
1990 Mustang: MS3Pro Gen 1, 306ci, 72mm turbo, 80lb inj, 36-1 + Cam Sync + D585 coils, World heads, TFS1 cam, GT40 intake, auto, Speed Density
1987 Mustang: MS2v3.57, direct coil control, MSD VR Dizzy, SBE, Weiand 174,190cc heads, F303 cam, TBI w/ (4) 160lb inj, GT500 MAF
1987 Mustang: MS2v3.57, direct coil control, MSD VR Dizzy, SBE, Weiand 174,190cc heads, F303 cam, TBI w/ (4) 160lb inj, GT500 MAF