I have no idea how get this to work. I can't make any sense of the online manual.
What am I doing wrong? I simply connected canh to canh and canl to canl. No resistors as I understood both ms3x and microsquirt have them internaly.
I attached the MSQs in question.
MS3x and microsquirt tcu can't get CAN to work
Moderators: jsmcortina, muythaibxr
MS3x and microsquirt tcu can't get CAN to work
- Attachments
-
- Sunshine ms3x.msq
- (274.03 KiB) Downloaded 19 times
-
- Sunshine TCU.msq
- (25.43 KiB) Downloaded 19 times
Greetings from Sweden /Jonas
-
- Super MS/Extra'er
- Posts: 1341
- Joined: Mon Sep 05, 2011 1:20 pm
Re: MS3x and microsquirt tcu can't get CAN to work
You have to set up the CAN device in the project properties. In Tuner Studio File, Vehicle Projects, Project Properties, CAN Devices, click on add (+). Everything powered up, of course.
Graduate of EFI University.
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!