What 100k ohm resistors for VND5N07 input
Moderators: jsmcortina, muythaibxr
What 100k ohm resistors for VND5N07 input
Hi, I'm building a 4 channel injectior driver for my MS2 and I wonder if I can use 1/8W 100K resistors left from previous builds (R22,R49 and R50) ?
1978 vw golf gti 16v itb cop full sequential MS2
1992 vw corrado 16v moonlight blue MS2
1992 vw corrado 16v moonlight blue MS2
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: What 100k ohm resistors for VND5N07 input
They should be fine.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: What 100k ohm resistors for VND5N07 input
You'd need an awful lot of volts to exceed the rating of a 100k 1/8w resistor.2swe wrote:Hi, I'm building a 4 channel injectior driver for my MS2 and I wonder if I can use 1/8W 100K resistors left from previous builds (R22,R49 and R50) ?
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
MS2 V3
EDIS
Tech Edge O2
London UK.
Re: What 100k ohm resistors for VND5N07 input
thank you.
1978 vw golf gti 16v itb cop full sequential MS2
1992 vw corrado 16v moonlight blue MS2
1992 vw corrado 16v moonlight blue MS2