What sort of power supply will I need to bench test my COP's?
Would a 1A 12v transformer be enough.
Alternatively will my 18v drill battey fry the coil?
COP bench test
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39614
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: COP bench test
Use a FUSED car (or bike) 12V battery. The coils are going to need 6-7A peak.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: COP bench test
And use a 1-3A fuse to power the MS and a separate fuse(s) for the coils.
Jean
Jean