I just finished up step everything except soldering in the MAP sensor.
Im getting signal from my JimStim but nothing to MS
MS II w/ JimStim V2 Hall RPM signal problems.
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 13
- Joined: Mon Dec 15, 2014 12:05 am
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: MS II w/ JimStim V2 Hall RPM signal problems.
I'll need a bit more information:
How is the board configured for RPM input?
What spark mode is enabled in TunerStudio?
How is the JimStim jumpered?
How is the board configured for RPM input?
What spark mode is enabled in TunerStudio?
How is the JimStim jumpered?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- MS/Extra Newbie
- Posts: 13
- Joined: Mon Dec 15, 2014 12:05 am
Re: MS II w/ JimStim V2 Hall RPM signal problems.
Sorry I double posted. Here's all the info http://www.msextra.com/forums/viewtopic ... 32&t=56887
-
- MS/Extra Newbie
- Posts: 13
- Joined: Mon Dec 15, 2014 12:05 am
Re: MS II w/ JimStim V2 Hall RPM signal problems.
Also I couldn't find the settings for the spark mode in tuner studio lite, I'll look harder after work