So i didn't buy a stim when i bought all my stuff. Not really sure why and i might still get one, but for tonight . . . how can i power up my MS2 in my livnig room?
I have the relay/ fuse board and i have the harness, can i power this guy up with a 12V power supply just spliced into the harness? or would it be better to wire it up into the relay board?
the power supply i have is 12v 2A
Power supplty without Stim
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 26
- Joined: Sat Jan 24, 2015 7:31 pm
-
- Site Admin
- Posts: 39620
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Power supplty without Stim
The minimum connection for testing is shown in the manual
http://www.msextra.com/doc/pdf/html/MS2 ... .3-40.html
or you could do the same via the relay board.
James
http://www.msextra.com/doc/pdf/html/MS2 ... .3-40.html
or you could do the same via the relay board.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".