A little help

Ask questions about DIY board assembly issues, fault finding and testing. (Covers all Megasquirt versions and board.)

Moderators: jsmcortina, muythaibxr

Post Reply
Irocguy85
MS/Extra Newbie
Posts: 1
Joined: Tue Jan 27, 2015 9:25 pm

A little help

Post by Irocguy85 »

I have a ms3 with a ms3x board. My question is if I'm running the ms3x do I have to do anything with the Q16 ignition driver? Do I put a jumper across it or still add the transistor?
Top
elutionsdesign
Super MS/Extra'er
Posts: 1341
Joined: Mon Sep 05, 2011 1:20 pm

Re: A little help

Post by elutionsdesign »

If using the 3X expansion card you'd likely just not install it. No need to jumper anything.
Graduate of EFI University.

I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
Top
Post Reply

Return to “Board assembly and testing”