Find configuration file download

Ask questions about DIY board assembly issues, fault finding and testing. (Covers all Megasquirt versions and board.)

Moderators: jsmcortina, muythaibxr

Post Reply
petmof
MS/Extra Newbie
Posts: 1
Joined: Sat Sep 05, 2015 6:44 am

Find configuration file download

Post by petmof »

I am currently building the MegaSquirt-II ECU kit and I have come to a point that I need some advice. I am on instruction 26c of the assembly instructions. The instruction says " Download the HyperTerminal configuration file (for MegaSquirt) by clicking on the link." My question is what link? and where? How do I get the "configuration file?"
prof315
Super MS/Extra'er
Posts: 3760
Joined: Sun Jan 18, 2009 3:13 am
Location: Melbourne, FL

Re: Find configuration file download

Post by prof315 »

You are using old build instructions. Try the MS2 manuals linked at the top of this forum's page
Linfert Performance/321 Motorsports
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!
briney
MS/Extra Newbie
Posts: 7
Joined: Sat Jan 20, 2007 1:59 am
Location: australia

Re: Find configuration file download

Post by briney »

so a bit of a thread dig. i'm putting together a v2.2 and i'm up to doing the loopback test. my laptop has windows 10, and while i can download hyperterminal, it doesn't seem to match the instructions. there's no red telephone, and i don't seem to be able to get the window with the baud rate etc. to come up. how do i go about checking it with windows 10?
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Find configuration file download

Post by jsmcortina »

Those build instructions are now another two years out of date.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
BigBlockMopar
Experienced MS/Extra'er
Posts: 372
Joined: Sat Dec 31, 2011 6:10 am
Location: Netherlands
Contact:

Re: Find configuration file download

Post by BigBlockMopar »

Who hosts them and why can't they be updated, or better, asked to be removed?
Daily driver: 1973 Dodge Dart - 360ci engine - 11.3:1cr - MS3x - ignition only. 42RH/A500 OD+LU transmission / 3.23 gears
--------------
Website: https://www.bigblockmopar.nl/
YouTube Channel: https://www.youtube.com/c/BigBlockMopar
briney
MS/Extra Newbie
Posts: 7
Joined: Sat Jan 20, 2007 1:59 am
Location: australia

Re: Find configuration file download

Post by briney »

so how do i carry out the tests on step 22 without hyperterminal?
billr
Super MS/Extra'er
Posts: 6828
Joined: Sun May 15, 2011 11:41 am
Location: Walnut Creek, Calif. USA

Re: Find configuration file download

Post by billr »

"Step 22" in the current manual? Which part of the manual, specifically? When I look at the current assembly instructions, Step 22 is about R43, no mention of hyperterminal that I can see.
briney
MS/Extra Newbie
Posts: 7
Joined: Sat Jan 20, 2007 1:59 am
Location: australia

Re: Find configuration file download

Post by briney »

i'm not sure. i googled ms1 v2.2 assembly instructions, and i'm using what i found. where can i go for the latest version? it doesn't seem to be linked to this site.
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Find configuration file download

Post by jsmcortina »

manuals.png
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
briney
MS/Extra Newbie
Posts: 7
Joined: Sat Jan 20, 2007 1:59 am
Location: australia

Re: Find configuration file download

Post by briney »

that tab has an ms1 3.0 assembly manual, is this ok to use with my 2.2? i remember a few differences in the other assembly guides.
Post Reply