MSPNP Mustang Jumper question Ign1 to 36 and ign to TFI

Ask questions about DIY board assembly issues, fault finding and testing. (Covers all Megasquirt versions and board.)

Moderators: jsmcortina, muythaibxr

Post Reply
SWP73
MS/Extra Newbie
Posts: 1
Joined: Sun Dec 06, 2015 11:23 am

MSPNP Mustang Jumper question Ign1 to 36 and ign to TFI

Post by SWP73 »

Jumper wire for TFI goes from TFI IGN to IGN1
And it says IGN1 to 36 do both jumper wires go in ign1 hole or ? Car is a 93 5.0 mustang
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: MSPNP Mustang Jumper question Ign1 to 36 and ign to TFI

Post by Matt Cramer »

That doesn't sound like any jumpers on an MSPNP. The jumpers on an MSPNP for a 5.0 Mustang are explained at the bottom of this link.

http://www.megasquirtpnp.com/docs/mspnp ... ?isModel=1

If you have something other than an MSPNP, please post exactly what you have - a DIYPNP, MS2 with an adapter harness, etc.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Post Reply