I have a few DB37 breakout boards to break my jimstim and jimstimx db37 plugs out, was wondering if anyone had a decent pin for pin diagram to MS3PRO so I can double check what I have done before power up.
If not I made a mostly done spread sheet that I can share if someone wants to double check
Ms3pro & Jimstim
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 6828
- Joined: Sun May 15, 2011 11:41 am
- Location: Walnut Creek, Calif. USA
Re: Ms3pro & Jimstim
I saw pin-outs with a quick peek to the Pro manual...
Re: Ms3pro & Jimstim
Yeah I have the pro manual and its pin outs, and using the regular ms3's pinout ive got most of a pinout for the jimstim db37. Was just wondering if someone else had made a jimstim db37 plug to ampseal connection pinout.
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Ms3pro & Jimstim
Just use the screw terminals.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".