Hi Guys.
I'm running Ms2 v3 extra and can't get any of my programmable outputs working.
I have my tacho linked to iac1 but have nothing from it.
I have ran the jumpers to my spare outputs and js9 is linked to s12c.
Have I missed anything out?
Programmable outputs issue
Moderators: jsmcortina, muythaibxr
-
Scottblue5
- MS/Extra Newbie
- Posts: 26
- Joined: Thu Feb 04, 2016 11:05 am
-
jsmcortina
- Site Admin
- Posts: 39613
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Programmable outputs issue
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".