MS3 no FP

Ask questions about DIY board assembly issues, fault finding and testing. (Covers all Megasquirt versions and board.)

Moderators: jsmcortina, muythaibxr

Post Reply
elior77
Experienced MS/Extra'er
Posts: 204
Joined: Sun Nov 18, 2012 12:07 am

MS3 no FP

Post by elior77 »

Hey,

MS3 from Brain on a 05 miata, the fuel pump does not start, where should I look ?

I checked continuity on harness and it is ok, I check the FP circuit and it looks fine (continuity checked too), I noticed that D8 and R16 are missing.

Thanks
Elior
97 1.8T DIYPNP Seq Inj
http://megamiata.blogspot.co.il/
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: MS3 no FP

Post by Matt Cramer »

V3.0 or V3.57?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
elior77
Experienced MS/Extra'er
Posts: 204
Joined: Sun Nov 18, 2012 12:07 am

Re: MS3 no FP

Post by elior77 »

3.0

As I found out the R16 is missing and does not allow the cpu signal to reach the relay - I added it.
97 1.8T DIYPNP Seq Inj
http://megamiata.blogspot.co.il/
Post Reply