MX5 NB MS3x Build - Coil Pack connection

Ask questions about DIY board assembly issues, fault finding and testing. (Covers all Megasquirt versions and board.)

Moderators: jsmcortina, muythaibxr

Post Reply
sdc200x
MS/Extra Newbie
Posts: 3
Joined: Wed May 31, 2017 12:58 am

MX5 NB MS3x Build - Coil Pack connection

Post by sdc200x »

I would be grateful for some insight as I have poured over the build manual, this + other forums but haven't managed to reach a clear view.

I am currently building an MS3x to fit to a currently Stock MX5 NB VVT. ('04 Car)

The car as stock has two coil packs 1&4 + 2&3.

When wiring from the MS3x do I connect Spark A to one pack and Spark B to the other, or do I run Spark A & C to the first pack (1&4) and Spark B&D to the second coil park (3&4)

Any help greatly appreciated.

thanks,

Simon
WestfieldMX5
Master MS/Extra'er
Posts: 403
Joined: Tue Dec 30, 2008 9:46 am
Location: Belgium
Contact:

Re: MX5 NB MS3x Build - Coil Pack connection

Post by WestfieldMX5 »

2 coil packs means two spark outputs, A and B.
2016 Westfield SEiW MX5 1.8 - 6sp - Torsen - MSM turbo - MS3 Pro - 2.3kg/hp
sdc200x
MS/Extra Newbie
Posts: 3
Joined: Wed May 31, 2017 12:58 am

Re: MX5 NB MS3x Build - Coil Pack connection

Post by sdc200x »

many thanks
WestfieldMX5
Master MS/Extra'er
Posts: 403
Joined: Tue Dec 30, 2008 9:46 am
Location: Belgium
Contact:

Re: MX5 NB MS3x Build - Coil Pack connection

Post by WestfieldMX5 »

if you need help, there's a build manual on my site at westfieldmx5.devocht.com
2016 Westfield SEiW MX5 1.8 - 6sp - Torsen - MSM turbo - MS3 Pro - 2.3kg/hp
Post Reply