Page 1 of 1

Help: ID this M$2Extra Config

Posted: Tue Oct 31, 2017 7:09 am
by FubarI33t
Got this unit as a hand me down. was told one or both ign drivers are shot. got those plus others ready to order. But first. No INFO came with it such as What engine, Ign Setup Used or really anything at all. so. Here's a few pics. and I hope we can get it ID'ed and reset-up for what I want it used for.

My wanted Config: Datsun L18(4 cylinder Single OHC) Ford EDIS, 2 stage Injectors(8 total) Map AND TPS inputs along with the standard temp sensor. Fan control is stand alone. No Idle control needed. Wasted spark. Batch fire primary injectors. and if we can seq the secondaries sure. if not Batch fire them as well. Hope to fire them biased on Load and RPM.

Re: Help: ID this M$2Extra Config

Posted: Tue Oct 31, 2017 7:10 am
by FubarI33t
Srry for the large pics. but it does show location well lol

Re: Help: ID this M$2Extra Config

Posted: Tue Oct 31, 2017 7:23 am
by FubarI33t
as soon as I get a serial cable I can connect and maybe get some more info for whats stored on it.

Re: Help: ID this M$2Extra Config

Posted: Thu Nov 09, 2017 7:27 am
by billr
Still no bites on this one? The pictures are simply too poor in quality/format for me to even try guessing.

Re: Help: ID this M$2Extra Config

Posted: Thu Nov 09, 2017 7:36 am
by DaveEFI
If you are using EDIS, no need to replace the faulty high current ignition drivers. As those are in the EDIS module.