What 100k ohm resistors for VND5N07 input

Ask questions about DIY board assembly issues, fault finding and testing. (Covers all Megasquirt versions and board.)

Moderators: jsmcortina, muythaibxr

Post Reply
2swe
Experienced MS/Extra'er
Posts: 330
Joined: Sun Dec 25, 2011 12:41 pm

What 100k ohm resistors for VND5N07 input

Post by 2swe »

Hi, I'm building a 4 channel injectior driver for my MS2 and I wonder if I can use 1/8W 100K resistors left from previous builds (R22,R49 and R50) ?
1978 vw golf gti 16v itb cop full sequential MS2
1992 vw corrado 16v moonlight blue MS2
Top
jsmcortina
Site Admin
Posts: 39611
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Contact jsmcortina

Re: What 100k ohm resistors for VND5N07 input

Post by jsmcortina »

They should be fine.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Top
DaveEFI
Super MS/Extra'er
Posts: 4175
Joined: Sun Apr 15, 2012 12:55 am
Location: SW London, UK

Re: What 100k ohm resistors for VND5N07 input

Post by DaveEFI »

2swe wrote:Hi, I'm building a 4 channel injectior driver for my MS2 and I wonder if I can use 1/8W 100K resistors left from previous builds (R22,R49 and R50) ?
You'd need an awful lot of volts to exceed the rating of a 100k 1/8w resistor. :D
Rover SD1 3.5 EFI
MS2 V3
EDIS
Tech Edge O2
London UK.
Top
2swe
Experienced MS/Extra'er
Posts: 330
Joined: Sun Dec 25, 2011 12:41 pm

Re: What 100k ohm resistors for VND5N07 input

Post by 2swe »

thank you.
1978 vw golf gti 16v itb cop full sequential MS2
1992 vw corrado 16v moonlight blue MS2
Top
Post Reply

Return to “Board assembly and testing”