shadow dash can egt

[MS2tester]

i read here on the forum MS2 can,t display "CAN data"
now this was in a post in 2013
http://www.msextra.com/forums/viewtopic ... 33&t=51150

is it possible now?
and how to set it up !

[LT401Vette]

Nope, unfortunately there is still no where to set the CAN ID or add secondary CAN Devices.

[MS2tester]

but the CAN egt,s can be viewed in shadowdash when the can egt is connected through CAN to an MS3?

[jsmcortina]

but the CAN egt,s can be viewed in shadowdash when the can egt is connected through CAN to an MS3?

Yes.
In that case the MS3 is performing the fetches over CAN and processing into temperatures. ShadowDash isn't aware that there's a remote device - it collects all data just from the MS3.

James

[MS2tester]

nice because that is the number 1 reason for me to buy an android tablet an install shadowdash
and hopefully have MSdroid working in the future

[MS2tester]

I have it connected to my galaxy S4
But i can, t seem to get warnings working
I checked by selecting the gauge and it has the warnings in place 1150 high warning 1250 high critical but the gauge does not report it?

[LT401Vette]

I do not believe the Graph style gauges display critical or warning levels in any way in TS or SD.

[MS2tester]

would this be an idea for the next update?

[LT401Vette]

It would be simple enough, but it should probably be a new Gauge Style so as to not break any existing dashboards.