Gear indicator based on GPS?

For discussion of other tuning and logging softwares

Moderators: jsmcortina, muythaibxr

Post Reply
mynameistory
MS/Extra Newbie
Posts: 24
Joined: Wed Feb 27, 2008 9:20 pm

Gear indicator based on GPS?

Post by mynameistory »

I can't find any specific topic discussing this, but is there a configurable gear indicator on ShadowDash that can work off of the RPM and GPS (not wheel speed)?

Thanks,
-Tory
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Gear indicator based on GPS?

Post by LT401Vette »

That could be accomplished in a custom.ini file.
Make a new Output channel using RPM and GPS.speed channels.

Then use the round() function to turn it to an int.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Post Reply