Programming Innovate LC2. Is it possible with Mac, and how?
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 11
- Joined: Thu May 28, 2015 12:19 am
Programming Innovate LC2. Is it possible with Mac, and how?
Using a MS3x on my car, I would like to try the autotune, but need to program the signal from the LC2 to work with the ecu. On innovate's pages, it's said that Windows is needed. But is it still possible in some way to do it with my macbook pro?
-
- MS/Extra Newbie
- Posts: 11
- Joined: Thu May 28, 2015 12:19 am
Re: Programming Innovate LC2. Is it possible with Mac, and h
No need for help here. I just bought an old cheap laptop with Windows on it, to program the LC2.
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Programming Innovate LC2. Is it possible with Mac, and h
For others following along - you can use the LC2 default settings and do not need to connect to it - unless you bought it used and somebody had tampered with the settings, of course.
Matt Cramer -1966 Dodge Dart slant six running on MS3X