1.5alpha4 ini

For discussion of other tuning and logging softwares

Moderators: jsmcortina, muythaibxr

Post Reply
nismoautoxr
Super MS/Extra'er
Posts: 2631
Joined: Sun May 29, 2011 10:28 am
Location: birmingham ,Alabama. U.S.A.

1.5alpha4 ini

Post by nismoautoxr »

Just put 1.5alpha4 in my car . What do I do to get the initial to shadow dash?
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
Top
LT401Vette
Super MS/Extra'er
Posts: 12731
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:
Contact LT401Vette

Re: 1.5alpha4 ini

Post by LT401Vette »

Just put the ini's on the server.

Connect to your MS3 while you have internet access and the tablet should pull it down.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
Top
nismoautoxr
Super MS/Extra'er
Posts: 2631
Joined: Sun May 29, 2011 10:28 am
Location: birmingham ,Alabama. U.S.A.

Re: 1.5alpha4 ini

Post by nismoautoxr »

Thanks works good now.
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
Top
Post Reply

Return to “Other tuning /logging software”