Shadow dash KPH speed problem

For discussion of other tuning and logging softwares

Moderators: jsmcortina, muythaibxr

Post Reply
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Shadow dash KPH speed problem

Post by PUMPISH »

I have problem with KPH speed.
Does not matter even if I choose KPH in preferenses its stil shows speed in MPH.

I tryed to reinstall the app but have stil the same issue.

Any ides?
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Shadow dash KPH speed problem

Post by LT401Vette »

GPS or VSS Gauge?
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Re: Shadow dash KPH speed problem

Post by PUMPISH »

LT401Vette wrote:GPS or VSS Gauge?
VSS1 gauge. Its allways show Miles/h does not matter if I set KPH or MPH
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Re: Shadow dash KPH speed problem

Post by PUMPISH »

Tryed to reload a few times, even tryed to switch from KPH to MPH and back to KPA while driving but it stil show only miles/h
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Shadow dash KPH speed problem

Post by LT401Vette »

It changed how it works in recent MS3 firmwares... I'll get a fix in this next release.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Shadow dash KPH speed problem

Post by jsmcortina »

LT401Vette wrote:It changed how it works in recent MS3 firmwares... I'll get a fix in this next release.
What change was that?

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Re: Shadow dash KPH speed problem

Post by PUMPISH »

LT401Vette wrote:It changed how it works in recent MS3 firmwares... I'll get a fix in this next release.
The thing is that we making a car movie now and I need a tablet to film a speed because I dont have stock gauge anymore. And here in sweden is starts getting cold so soon I can no longer run with a slicks.
To film GPS speed is not nice, its lagging and jumping
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Shadow dash KPH speed problem

Post by LT401Vette »

We can always drop a custom.ini file in there and that will do it...
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Shadow dash KPH speed problem

Post by LT401Vette »

Drop the attached custom.ini into the folder:

/Shadow Dash MS/MS3/projectCfg/

Then you will have a VSS1 KPH gauge on the long click menu.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Re: Shadow dash KPH speed problem

Post by PUMPISH »

LT401Vette wrote:Drop the attached custom.ini into the folder:

/Shadow Dash MS/MS3/projectCfg/

Then you will have a VSS1 KPH gauge on the long click menu.
thanks! Great support!
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Re: Shadow dash KPH speed problem

Post by PUMPISH »

Just one more thing, if its gonna be possible in the future to read power on the dash?

Otherwise I am very happy with a new dash

Image
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Re: Shadow dash KPH speed problem

Post by PUMPISH »

hi I reloaded ini lile and set KPH but it only shows half speed.
When I drive 100km/h it shows 50 km/h

thanks
LT401Vette
Super MS/Extra'er
Posts: 12697
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: Shadow dash KPH speed problem

Post by LT401Vette »

Opps...

ini error..
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
PUMPISH
Master MS/Extra'er
Posts: 436
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)
Contact:

Re: Shadow dash KPH speed problem

Post by PUMPISH »

LT401Vette wrote:Opps...

ini error..

Yeah now it works! Thanks!
Post Reply