ShadowDash and MS3 1.5 firmware issues

For discussion of other tuning and logging softwares

Moderators: jsmcortina, muythaibxr

Post Reply
shuiend
Helpful MS/Extra'er
Posts: 71
Joined: Thu Jul 03, 2008 3:17 pm

ShadowDash and MS3 1.5 firmware issues

Post by shuiend »

I just updated one of my cars to the newest 1.5 firmware for my MS3x. When I try to open shadow dash it says version mismatch and I need to update Shadow Dash. I have uninstalled, and reinstalled the beta and the same thing. Any ETA on when it will start working with the 1.5 firmware.
94 Miata running a MS3. Begi turbo kit with a SR20 t25
LT401Vette
Super MS/Extra'er
Posts: 12684
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: ShadowDash and MS3 1.5 firmware issues

Post by LT401Vette »

Yes, this is a known issue. The currently released Shadow Dash does not support 1.5 MS3 firmware.
We should have a new release out by the end of this week that does and supports TS3 dashboards.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
shuiend
Helpful MS/Extra'er
Posts: 71
Joined: Thu Jul 03, 2008 3:17 pm

Re: ShadowDash and MS3 1.5 firmware issues

Post by shuiend »

Thanks for the info on that. I will look for the update in a bit.
94 Miata running a MS3. Begi turbo kit with a SR20 t25
BaldTurboFreak
Helpful MS/Extra'er
Posts: 88
Joined: Sun Aug 21, 2005 2:42 am

Re: ShadowDash and MS3 1.5 firmware issues

Post by BaldTurboFreak »

Hey downloaded this mornings version of shadow dash, still not communication with ms3 1.5 code
is there a new release since this is the dash for this car
shuiend
Helpful MS/Extra'er
Posts: 71
Joined: Thu Jul 03, 2008 3:17 pm

Re: ShadowDash and MS3 1.5 firmware issues

Post by shuiend »

BaldTurboFreak wrote:Hey downloaded this mornings version of shadow dash, still not communication with ms3 1.5 code
is there a new release since this is the dash for this car
I don't think they have released the update yet. So either wait, or downgrade back to 1.4.x.
94 Miata running a MS3. Begi turbo kit with a SR20 t25
LT401Vette
Super MS/Extra'er
Posts: 12684
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: ShadowDash and MS3 1.5 firmware issues

Post by LT401Vette »

Almost there...

Just buttoning up a few loose ends.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
haklis
Helpful MS/Extra'er
Posts: 68
Joined: Sun Jan 31, 2010 7:47 am

Re: ShadowDash and MS3 1.5 firmware issues

Post by haklis »

Great - looking forward to it!
Megasquirt project car: Escort mk2 Mexico replica with 2litre Zetec on GSXR ITB's. Sequential injection and spark . MS3 with ms3x.
shuiend
Helpful MS/Extra'er
Posts: 71
Joined: Thu Jul 03, 2008 3:17 pm

Re: ShadowDash and MS3 1.5 firmware issues

Post by shuiend »

I saw there was an update to ShadowDash last night. Is it the update that should work with the 1.5 firmware?
94 Miata running a MS3. Begi turbo kit with a SR20 t25
whittlebeast
Super MS/Extra'er
Posts: 2221
Joined: Tue May 04, 2004 8:20 pm
Location: St Louis
Contact:

Re: ShadowDash and MS3 1.5 firmware issues

Post by whittlebeast »

Rummer is that the new release of Shadow Dash should work with 1.5

Post here if here anything looks like an issue as all sorts of odd things can pop up with this sort of thing. I will be testing soon on MS Ultimate real soon.
shuiend
Helpful MS/Extra'er
Posts: 71
Joined: Thu Jul 03, 2008 3:17 pm

Re: ShadowDash and MS3 1.5 firmware issues

Post by shuiend »

I will be testing it out sometime this weekend and report back. One of my friends told me he had no issues with the older version working on his MS3X when he upgraded to 1.5.
94 Miata running a MS3. Begi turbo kit with a SR20 t25
BaldTurboFreak
Helpful MS/Extra'er
Posts: 88
Joined: Sun Aug 21, 2005 2:42 am

Re: ShadowDash and MS3 1.5 firmware issues

Post by BaldTurboFreak »

What is the latest beta Version number? I just installed 1.34 a few minutes ago and it still has the error message about needing a newer version of the software to connect to 1.5xx
shuiend
Helpful MS/Extra'er
Posts: 71
Joined: Thu Jul 03, 2008 3:17 pm

Re: ShadowDash and MS3 1.5 firmware issues

Post by shuiend »

I was running beta 1.3.4 I think, looking now after it autoupdated last night I am on 1.5.0.
94 Miata running a MS3. Begi turbo kit with a SR20 t25
whittlebeast
Super MS/Extra'er
Posts: 2221
Joined: Tue May 04, 2004 8:20 pm
Location: St Louis
Contact:

Re: ShadowDash and MS3 1.5 firmware issues

Post by whittlebeast »

I just hooked up my Samsung note 4 on the newest Shadow Dash and Ultimate and it came right up. I also got the Microsquirt IO box working connected thru the new CAN port and it appears to be fine.

Andy
shuiend
Helpful MS/Extra'er
Posts: 71
Joined: Thu Jul 03, 2008 3:17 pm

Re: ShadowDash and MS3 1.5 firmware issues

Post by shuiend »

I tried shadowdash version 1.5.0 today on my MS3X running firmware 1.5 and it worked perfectly.
94 Miata running a MS3. Begi turbo kit with a SR20 t25
Speedy_G
Experienced MS/Extra'er
Posts: 195
Joined: Fri Aug 01, 2014 8:30 am

Re: ShadowDash and MS3 1.5 firmware issues

Post by Speedy_G »

i just hijack this thread as its the same topic:

I updated to 1.5.02 Shadow Dash Version but still some TS3 values are not shown or crossed out
for example:
-Fuel Flow [cc/min]
-Fuel Liters used [l]


i also replaced the dashboards on the tablet with those saved by tunerstudio, just to be save. (didnt help)

Oh and ive got an idea concerning fuel liters used. Ive seen on the laptop that this value is somehow stored.
Maybe its possible to reset the value when you put your finger on it. Like its possible for the Data-Log toogle.
Then you can reset this value after refuelling.
LT401Vette
Super MS/Extra'er
Posts: 12684
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: ShadowDash and MS3 1.5 firmware issues

Post by LT401Vette »

Speedy_G wrote:i just hijack this thread as its the same topic:

I updated to 1.5.02 Shadow Dash Version but still some TS3 values are not shown or crossed out
for example:
-Fuel Flow [cc/min]
-Fuel Liters used [l]

The TS 3.0 dashboards are supported, but the performance and economy channels are not yet there. They will be coming in a quick follow up, but I needed to get the release out to support TS 3.0 dashboards and MS3 1.5 firmware quickly. Now the enhancements will come...
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
haklis
Helpful MS/Extra'er
Posts: 68
Joined: Sun Jan 31, 2010 7:47 am

Re: ShadowDash and MS3 1.5 firmware issues

Post by haklis »

The TS 3.0 dashboards are supported, but the performance and economy channels are not yet there. They will be coming in a quick follow up, but I needed to get the release out to support TS 3.0 dashboards and MS3 1.5 firmware quickly. Now the enhancements will come...
This confirmed why these fields was crossed out for me as well. I was trying to utilize these with my new 10Hz GPS. I was just about to ask why and here's the answer!
I really appreciate your work with ShadowDash!
Hakon
Megasquirt project car: Escort mk2 Mexico replica with 2litre Zetec on GSXR ITB's. Sequential injection and spark . MS3 with ms3x.
Post Reply