New User - Dumb questions ;)

For discussion of other tuning and logging softwares

Moderators: jsmcortina, muythaibxr

Post Reply
CbrRacer
MS/Extra Newbie
Posts: 2
Joined: Wed Jul 26, 2017 2:12 am

New User - Dumb questions ;)

Post by CbrRacer »

Ok. I've just bought a race bike fitted with a Microsquirt.
It came with an android phone using Shadow Dash as the dashboard.
The phone was stuffed (like a number of other things on this supposedly 'race ready' hahaha bike :twisted: ) so I've replaced the phone and have downloaded and registered Shadow Dash to the new phone. Why can't I see/slide to the other dash boards on the phone like shown in the introducing Shadow Dash video? I understand it won't show any data but why can't I see the same dash's Phil shows before he starts the car? I've had a search but must be the only dumb ass that can't figure it out :( Go easy on me :)

What I see;
Screen Shot 2017-07-26 at 9.44.22 PM.png
What I'd like to see;
Screen Shot 2017-07-26 at 9.04.23 PM.png
Efi, Megasquirt and Android are all new to me, I'm used to carbs, Ignitech ignitions and Mac/iPhone ;)

Thanks.
LT401Vette
Super MS/Extra'er
Posts: 12684
Joined: Sat Jul 16, 2005 8:07 am
Location: Moorseville, NC
Contact:

Re: New User - Dumb questions ;)

Post by LT401Vette »

There are different dashboards for the different various firmwares. So it doesn't load any of the others until you connect the 1st time so it will set you up with the right dashboards for your firmware.
Phil Tobin
EFI Analytics, helping to simplify EFI
Next Generation tuning software.
Supporting all MegaSquirt versions and firmwares.
http://www.TunerStudio.com
http://www.efiAnalytics.com/MegaLogViewer/
Support the firmware running your engine:
http://www.msextra.com/doc/donations.html
CbrRacer
MS/Extra Newbie
Posts: 2
Joined: Wed Jul 26, 2017 2:12 am

Re: New User - Dumb questions ;)

Post by CbrRacer »

Thanks for that. I have ordered cables from EFI Analytics a few days ago to connect my laptop and phone to the Microsquirt. I thought I might be able to view and configure the dash to my liking while I waited for the cables to arrive and test everything out. Cheers.
Post Reply