MegaMeet 2014 @ DIYAutoTune, Sept 20
Moderators: jsmcortina, muythaibxr
MegaMeet 2014 @ DIYAutoTune, Sept 20
Here is your official invitation to MegaMeet 2014, hosted on September 20, by DIYAutoTune in Suwanee, GA.
When: The official 'MegaSquirt Meet' will be Saturday September 20th, 2014 -- We'll be hanging out in the area Friday the 19th thru Sunday the 21st.
Where: DIYAutoTune HQ in Suwanee, GA, just NE of Atlanta.
DIYAutoTune.com
3690D Burnette Park Drive
Suwanee, GA 30024
What: The Annual MegaMeet is an opportunity to come and hang out with some of the major players that make the MegaSquirt project happen. Bowling and Grippo, the creators of MegaSquirt EFI will be here, as will Phil Tobin, writer of the TunerStudio and MegaLogViewer software. Typically, James Murray (all the way over from the UK) and Ken Culver, writers of the MS2/Extra and MS3 Firmware, come out and play as well! Several others who continue to make this project possible will be here to share the latest news on upcoming products and to talk tech. We've had people travel from all over the US, come down from Canada, and from as far as the UK to be here and that's sure to happen again this year.
Click here for more info:
http://www.diyautotune.com/events/megameet_2014.htm
When: The official 'MegaSquirt Meet' will be Saturday September 20th, 2014 -- We'll be hanging out in the area Friday the 19th thru Sunday the 21st.
Where: DIYAutoTune HQ in Suwanee, GA, just NE of Atlanta.
DIYAutoTune.com
3690D Burnette Park Drive
Suwanee, GA 30024
What: The Annual MegaMeet is an opportunity to come and hang out with some of the major players that make the MegaSquirt project happen. Bowling and Grippo, the creators of MegaSquirt EFI will be here, as will Phil Tobin, writer of the TunerStudio and MegaLogViewer software. Typically, James Murray (all the way over from the UK) and Ken Culver, writers of the MS2/Extra and MS3 Firmware, come out and play as well! Several others who continue to make this project possible will be here to share the latest news on upcoming products and to talk tech. We've had people travel from all over the US, come down from Canada, and from as far as the UK to be here and that's sure to happen again this year.
Click here for more info:
http://www.diyautotune.com/events/megameet_2014.htm
Ben Berusch
DIYAutoTune.com
DIYAutoTune.com
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
d*** I'll be in Hawaii
Linfert Performance/321 Motorsports
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
I'll be there, just booked my flights.
If you've not been before, do come along. We like to talk to Megasquirt users and if you bring your car or bike along we try to make time to discuss any issues you may have.
James
If you've not been before, do come along. We like to talk to Megasquirt users and if you bring your car or bike along we try to make time to discuss any issues you may have.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
1800 miles from Tucson, Az. I'll try to be there. Looks like Dallas is half way.
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
I will be there as well.
Megasquirt is not for use on pollution controlled vehicles. Any advice I give is for off road use only.
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
Man I wish I could be there. I am only in central Florida so it wouldn't be too bad of a drive. I have driven to NJ and back a couple times. I just wish the timing was good, which its not this year.
Do you guys do this every year at the same time roughly? Or every 6 months? Cause I would love to attend one of these meets, just not available for this one :/
Do you guys do this every year at the same time roughly? Or every 6 months? Cause I would love to attend one of these meets, just not available for this one :/
Megasquirt 2 V3.0 Running Msextra 3.4.2. in a 1989 Camaro RS .48AR/60mm Turbo 3.4L/700R4
Boost control, Fan control, Stepper IAC, Launch/Antilag, Working on the GMDIS, and Methanol injection
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
They are every year, although the timing has varied from spring to fall.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
Hello Matt,
Which is the closest airport for this place ? I'd like to be there but have to inquire for travel cost before
Thx.
Which is the closest airport for this place ? I'd like to be there but have to inquire for travel cost before
Thx.
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
Atlanta Airport.
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
i.e. ATLol boy wrote:Atlanta Airport.
Some of the flight options I looked at were via CDG.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
Too bad I don't live in Marietta anymore. Atlanta is a long drive from Denver.
2000 ZX2 : Sequential COP, MS3 + MS3X + TinyIOx, PWM Returnless Fuel, Flex Fuel, Variable Geometry Intake Manifold, Garrett GTX2863R .82AR housing @ 15 psi
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
I'm sure that CDG is mostly close to you than I am ;-) I'm living near Nîmes.jsmcortina wrote: Some of the flight options I looked at were via CDG.
James
Manu
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
We are here at Applebee's. Don't see anybody???
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
We were still hanging out at DIYA and caught up with them later.shaodome wrote:We are here at Applebee's. Don't see anybody???
It was good to meet up with everyone over the weekend and to have the chance to talk to some customers. I enjoyed the presentations and the range of cars that turned up.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
My buddy and I are planning now to come next year. Not sure which car we will bring but it's on the books and the girlfriends are already aware!!!!
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
This year's meet was good. It was good to meet some people I hadn't met before but had talked to for years on the forum.
Megasquirt is not for use on pollution controlled vehicles. Any advice I give is for off road use only.
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
I'd go so far as to say that this year's Megameet was even better than last year's. Lots of folks came out and there were many interesting projects. It was great being able to meet people in person.
Big thanks to Jerry and all the guys at DiyAutoTune for their hospitality. I hope we didn't make too big of a mess.
Sam
Big thanks to Jerry and all the guys at DiyAutoTune for their hospitality. I hope we didn't make too big of a mess.
Sam
___________________________________________________________
If nothing breaks, you're not trying hard enough...
Datsun 280Z
ITB
Turbo
MS3 + MS3X
If nothing breaks, you're not trying hard enough...
Datsun 280Z
ITB
Turbo
MS3 + MS3X
Re: MegaMeet 2014 @ DIYAutoTune, Sept 20
Any video links to the stuff talked about?
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact: