looking for maps 3.0 duratec
Moderators: jsmcortina, muythaibxr
looking for maps 3.0 duratec
Posted on this once all ready. I dont think i had the right title. Im looking for VE and timing maps that are as close to factory as possible. Or a screen shot of the factory maps.
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: looking for maps 3.0 duratec
First... do you have a means of converting the way the factory ECU stores its maps into ones for MegaSquirt?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: looking for maps 3.0 duratec
If i had a screen shot. I can put the values into a MS maps by hand and build it that way.
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: looking for maps 3.0 duratec
Often factory load numbers are so different to interpret that you're best building a map by hand following the manual for your MegaSquirt variant.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
Re: looking for maps 3.0 duratec
I understand that the factory load is diff to interpret. But I don't mind. I would like to see one, and also the timing map.
Re: looking for maps 3.0 duratec
No body has one of these.
Re: looking for maps 3.0 duratec
Is it because nobody wants to share. Do I have to pay for info. Or there is just no body out there tuning these.
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: looking for maps 3.0 duratec
I'm not sure anyone present on this forum has cracked the factory maps. Most of the people here are more into replacing factory ECUs than hacking them.
Matt Cramer -1966 Dodge Dart slant six running on MS3X