Hi Folks
I have just built my V3.0 Megasquirt board with the V2 controller, and its working and talking to my PC.
In the next few weeks I will make a new wiring harness to connect to my 1987 Iroc-Z with a 5.7L.
Does anyone have a basic Small Block Chevy or a Known-good IROC-Z 5.7L Tuned Port project file with mappings and such? I would like to start from some known good place. I have some maps from Holley that I could use, but a direct Megasquirt proven project would be nice
Thanks
Iroc 5.7L
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: Iroc 5.7L
It's not a perfect match, but we have a map from a Stealth Ram equipped Nova.
http://www.diyautotune.com/tech_article ... 3-nova.htm
http://www.diyautotune.com/tech_article ... 3-nova.htm
Matt Cramer -1966 Dodge Dart slant six running on MS3X