Post
by kjones6039 »
M30guy wrote:There was a blown 20 in their so I just put in what I had a 30.... What do you guys think is a fine sized fuse?
I'm going to agree with James on this one!! (Of course, I
always agree with James anyway!!!)
If a 20 amp fuse saved your bacon this time, I'd d*** sure replace it with a
20 again!!
Good luck!
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance