So, figuring out this stuff on a MS1.
Does using "Use AFR Target table=Yes" disregard "Ego switchpoint V" and use the AFR target table instead?
And does using "Change ego limit above 80kpa" and "Change EGO limit to(+-)=0" effectivily turn of the AFR targets above 80kpa?
I've tried to illustrate it, but i'm guessing you already know the answer
EGO and AFR targets
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 643
- Joined: Sun Nov 06, 2005 12:31 am
- Location: NORTHERN CALIFORNIA
Re: EGO and AFR targets
what firmware are you using, I don't remember seeing anything like what you are showing on my ms1, post your tune msq and you will be more likely to get help.
http://www.msextra.com/forums/posting.p ... 34&t=61470#
http://www.msextra.com/forums/posting.p ... 34&t=61470#
64 el camino, 383 SBC, 11.7 to1 CR, accufab tb/rhs intake, 44lb injectors, trick flow heads, xr292r solid roller cam, belt drive camshaft, dry sump oil system, 2400 stall, turbo 350, spooled 9 inch, strange axles, 3.89 gears, dual wideband, full sequential fuel/cop, MS3x using 1.4.1 code.